FJ40 Knuckle Swap

SKU:
304149-1-KIT
$3,077.00
TOYOTA
Land Cruiser
FJ 40
Category: 
AXLE UPGRADES & SERVICE
Standard

FJ40 Knuckle Swap

NOTE: Kit contents may differ slightly from product images depending on options selected.
 
Trail-Gear is proud to release a complete knuckle swap kit for the FJ40 front axle. Included in the kit is everything needed to install Trail-Gear’s 6 shooter knuckles, 30-Spline Birfields, Highsteer, and Disc Brakes. The only item that the customer needs to source is a steering box compatible with high steer on a FJ40. In order to support all applications drag link tubing and weld in bungs are included so that the customer can build a custom drag link that is best suited to their lift and steering box combination.

This kit comes with all hardware needed and will not leave you having to run to the store in order to get the vehicle back on the road again. Trail-Gear also gives the customers a variety of options to choose from. All Knuckle Studs, Spindle Studs and Hub Studs included are made from Trail-Gear Super metal.

The customer can select the following options

Birfield Kits:

  • Elocker Gun Drilled Super Set
  • Regular Gun Drilled Super Set
  • No Axles

Trunnion Bearings:

  • Standard Trunnion Bearings
  • Trunnion Bearing Eliminators

Hub Bodies:

  • OEM Hub Bodies and Manual Locking Hubs
  • TG Creeper Flange Hub Bodies and Creeper Flanges
  • Longfield Studless Hub

Included in the Kit is:

  • Fully Loaded 6 shooter Kit
  • Gun Drilled Birfield kit if desired
  • Choice of hub body (OEM, Drive Flange or Studless hub)
  • Brake rotors, calipers and pads
  • Brake lines
  • Backing plate eliminator
  • Super metal Knuckle studs
  • Super metal hub studs (If necessary)
  • Manual Locking Hub or Drive Flange( if necessary)
  • Trunnion bearings or Trunnion Bearing Eliminators
  • Wheels Studs
  • High Steer kit
  • All other necessary hardware to complete installation

Notes: Welding Required, we recommend welding of any components to be done by a certified welder.  Axle seals included in kit will not work on pre-1968 axles.

Application Data:

  • 1960-1983 Toyota LandCruiser FJ40
  • 1960-1983 Toyota LandCruiser FJ45

​Available Options:

304149-1-KIT KIT, FJ 40 KNUCKLE SWAP,NO BIRFS,TRUNNION BEARING,LOCKING HUB
304150-1-KIT KIT, FJ 40 KNUCKLE SWAP,NO BIRFS,TRUNNION BEARING,DRIVE FLANGE
304151-1-KIT KIT, FJ 40 KNUCKLE SWAP,NO BIRFS,TRUNNION BEARING,STUDLESS HUB
304152-1-KIT KIT, FJ 40 KNUCKLE SWAP,NO BIRFS,TRUNNION BEARING ELIM,LOCKING HUB
304153-1-KIT KIT, FJ 40 KNUCKLE SWAP,NO BIRFS,TRUNNION BEARING ELIM,DRIVE FLANGE
304154-1-KIT KIT, FJ 40 KNUCKLE SWAP,NO BIRFS,TRUNNION BEARING ELIM,STUDLESS HUB
304155-1-KIT KIT, FJ 40 KNUCKLE SWAP,30 LONG SPLINE,TRUNNION BEARING,LOCKING HUB
304156-1-KIT KIT, FJ 40 KNUCKLE SWAP,30 LONG SPLINE,TRUNNION BEARING,DRIVE FLANGE
304157-1-KIT KIT, FJ 40 KNUCKLE SWAP,30 LONG SPLINE,TRUNNION BEARING,STUDLESS HUB
304158-1-KIT KIT, FJ 40 KNUCKLE SWAP,30 LONG SPLINE,TRUNNION BEARING ELIM,LOCKING HUB
304159-1-KIT KIT, FJ 40 KNUCKLE SWAP,30 LONG SPLINE,TRUNNION BEARING ELIM,DRIVE FLANGE
304160-1-KIT KIT, FJ 40 KNUCKLE SWAP,30 LONG SPLINE,TRUNNION BEARING ELIM,STUDLESS HUB
304161-1-KIT KIT, FJ 40 KNUCKLE SWAP,30 REG,TRUNNION BEARING,LOCKING HUB
304162-1-KIT KIT, FJ 40 KNUCKLE SWAP,30 REG,TRUNNION BEARING,DRIVE FLANGE
304163-1-KIT KIT, FJ 40 KNUCKLE SWAP,30 REG,TRUNNION BEARING,STUDLESS HUB
304164-1-KIT KIT, FJ 40 KNUCKLE SWAP,30 REG,TRUNNION BEARING ELIM,LOCKING HUB
304165-1-KIT KIT, FJ 40 KNUCKLE SWAP,30 REG,TRUNNION BEARING ELIM,DRIVE FLANGE
304166-1-KIT KIT, FJ 40 KNUCKLE SWAP,30 REG,TRUNNION BEARING ELIM,STUDLESS HUB